Evaporative Portable Air Cooler Fan Use & Care Guide

Tags,

Can we use a solution that promises excellent energy efficiency to get through the summer heat? A portable evaporative cooler can efficiently and effectively supply a high degree of cooling power. It’s interesting that it uses less energy yet provides unparalleled cooling power. A device known as an evaporative cooler is also frequently referred to as a swamp cooler. It is a special cooling system that works well in drier areas. They are therefore well-known in the West, which explains why. Both purchasing and maintaining the cooling system are affordable.

An Evaporative Portable Air Cooler Fan  works to reduce temperatures by delivering water vapor into the atmosphere. Evaporative cooling is a natural process that frequently happens almost everywhere in our surroundings. You only need to turn on your lawn sprinklers to get the idea. You’ll notice that the air is significantly cooler when you’re standing close to the part of your yard that is being watered. The idea of evaporative cooling is comparable to this.

Portable evaporative coolers are becoming more and more popular as an environmentally friendly and economical alternative to traditional air conditioners. Before buying a portable air cooler, you should know a few factors.

What are the benefits of using a Portable Evaporative Cooler?





Super Energy Efficient

Using portable air coolers to chill your space is quite economical without spending a lot of money on power. Swamp coolers can be up to 50% less expensive than air conditioners that employ chilled cooling systems. Imagine paying less than $1 for a 36-inch swamp cooler to run for a whole day! Just use water and electricity are required as running expenses. Even some designs for swamp coolers don’t require any electricity.

Zero Emissions

The system does not emit any pollutants and has a small carbon impact. The evaporative cooler is a conventional cooling device without a compressor or refrigerant gas. It also doesn’t discharge any hazardous substances into the atmosphere. We use no potentially harmful refrigerants in swamp cooling systems.

As we all know, most refrigerant compounds used in air conditioning systems damaged the ozone layer on earth. They thus contribute to global warming.

Prevent Air Pollution

The cooler has a filter installed to assist remove dirt and impurities that cause odors from the interior environment. As a result, a cooler that has a filter will enhance your room’s indoor air quality. The cooler protects the environment and your home’s interior spaces from air pollution. The Airy Plant is yet another really innovative item frequently employed to filter air without energy efficiently.

Portable and Practical

The Evaporative Portable Air Cooler Fan is simple to move to any room. The gadget is also easy to pack because we design it easy to move.

Cost-Effective Setup

Your portable evaporative cooler may be more affordable than typical air conditioners. These solutions are cost-effective because no money needs to be set aside for the device’s installation. You may easily install the evaporating cooler in any of your rooms after purchasing it from internet retailers. We should clean the water tank, the engine, and the filter parts timely after a set amount of time passed. Fortunately, you don’t need any special skills or experience to complete the job.

Adds Moisture

The evaporative cooling equipment increases the amount of moisture inside your home. As a result, the cooler will be useful if you live in an area with drier weather. Common AC systems have a significant drawback. Unlike evaporative coolers, traditional air conditioning systems remove moisture from the indoor environment. Be aware that removing moisture from the indoor environment may make it harder to breathe. It may cause the skin to dry out or crack.

Before You Begin

Our strong portable air conditioners are excellent cooling options for single rooms and make your area feel cozy. In order to circulate air and remove moisture, it also incorporates ventilation and dehumidifying function. 

They are self-contained systems that don’t need to be installed permanently, so you may transfer them to the location where they are most needed. We widely used them in kitchens, temporary housing, computer rooms, garages, and several other locations where the installation of an outside air conditioner is impractical.

● Please carefully read all instructions.
● Save the instructions for later use.
● Sort and count each component and piece of hardware.
● Follow the correct sequence after carefully reading through each step.
● To prevent moving the product needlessly once completed, we advise that, if workable, we should all assemble all these products close to the location where you are frequently in use.
● Always set the item down on a level, sturdy surface.
● Keep all the product’s small parts and packaging away from infants and kids, since they might be a significant choking danger.

For Your Safety

Operational Precautions




WARNING- to reduce the risk of fire, electric shock, or injury to persons or property:

● Before plugging in, please let the portable air conditioner stand straight for at least 24 hours.
● The manufacturer or other similarly trained individuals replaced the power cable to prevent a hazard in the damaged situation.
● During maintenance, we must unplug the device from its power supply.
● Always use a power supply with the same voltage, frequency, and rating as specified on the product identification plate while operating the appliance.
● Always plug your devices into a grounded outlet.
● When cleaning or not in use, unplug the power cord.
● Do not operate with moist hands. Stop water from dripping onto the device.
● Never submerge or expose the device to dampness, rain, or any other liquid.
● Never let the machine run unsupervised. Never tilt or tip the device over.
● While the appliance is running, avoid unplugging it.
● Never disconnect a device by yanking on the power cord.
● Never use an adaptor plug or extension cord.
● Place nothing on the appliance.
● Never sit or climb on the device.
● Not put fingers or other items inserted into the air outlet.
● Avoid touching the unit’s metal fins or air intake.
● If we have dropped/damaged some part of the device, or exhibit other warning signals of a malfunction, do not use it.
● Use no chemicals while cleaning the equipment.
● Ensure we placed the device far from any potential fire, flame, or explosion sources.
● Installation of the item must follow national wiring requirements.
● Use only the defrosting and cleaning methods advised by the manufacturer. Do not use any other methods.
● We must keep the equipment in a room with no sources of continuous power (for example, open flames, an operating gas appliance, or an operating electric heater).
● Storage of the equipment is required to guard against mechanical damage.
● Even after usage, never let it into pieces or burn.
● Be mindful that refrigerants cannot smell.
● It is necessary to adhere to national gas rules.
● Keep all necessary ventilation holes unobstructed.
● We must keep the appliance in a well-ventilated space with a room size that matches the operating space requirements.




Installation




Unpacking
● Take the appliance and its accessories out of the container after unpacking it.
● After packaging, inspect the gadget for any scratches or other damage.





Choose your location

● Before starting the Evaporative Portable Air Cooler Fan, if they have tilted it greater than 45 degrees, let it sit straight for at least 24 hours.
● To ensure optimal air circulation, place the unit in a location with at least 50 cm (20 inches) of open space all around it. This surface should be firm and level.
● Avoid operating near walls, drapes, or other anything that could obstruct air entry and outflow. Keep obstructions away from the air inlet and outflow.
● Never expose the device to the following location:
Heat sources, such as radiators, heat registers, stoves, or other products, produce heat.
Direct sunlight
Mechanical vibration or shock
Excessive dust
Lack of ventilation, such as a cabinet or bookcase
Uneven surface





Attach The Exhaust Hose





For the exhaust air from the air conditioner, which comes from the device and contains waste heat and moisture, to leave the room, it must vent the gas outdoors. Avoid replacing or extending the exhaust pipe since doing so can reduce efficiency or cause the unit to shut off owing to low back pressure.


Step 1:
We should connect one end of the exhaust hose to the hose connection.

Step 2:
We should connect the opposite end of the exhaust line to the windows kit adapter.

Step 3:
Adjust the window kit so that it is the full length of your window. Join the window kit and the exhaust hose. 

Step 4:
In order to keep the kit in place, close your window. It must securely keep the window kit in place, and if necessary, tape it down with duct tape. For best effectiveness, we advise that sealed the opening between the adapter and the window’s sides.

Step 5:
We can connect the unit’s exhaust air output to the hose connector.

Step 6:
The flexible exhaust hose’s length is adjustable, and we should avoid bends. Then put the air conditioner next to an outlet.

Step 7:
Turn on the appliance after adjusting the louver at the air outlet.






Operation




Start-up and Shutdown
For the device to switch on, press POWER. The unit always operates in FAN mode.
● To select the preferred operation mode, press the MODE button.
● To switch off the power, press POWER once again.





Cooling your room
Make advantage of the cold setting to lower the temperature in your area. For the manual change in the Evaporative Portable Air Cooler Fan, turn the inner louver to alter the horizontal airflow. Note: The air conditioner shuts off if the room temperature drops below the selected level.





Ventilating your room
● In order to activate the LED for FAN operation, continually press the MODE button.
● When we activated the ventilation mode will circulate the room air, but not in the cooling situation. To change the fan speed, continually press the SPEED button.




Drying your room
When you press the MODE button on the remote control or control panel, the LED for a DRY operation turns on. It cannot choose the fan speed. The user should attach the hose to the unit’s bottom drain exit.
Note that we can’t change the fan speed automatically shifts to low speed in this mode.




Sleep mode 
Only a remote control may access this feature. When in cool mode, the sleep mode can be engaged. The preset temperature increases by 33.8°F (1°C) after an hour and then increases by 33.8°F (1°C) again after another hour.




Automatic Defrost
During operation, frost may accumulate at low room temperatures at the Evaporative Portable Air Cooler Fan. The defrosting process will begin automatically, and the power LED will begin flashing. The following is the defrost control sequence: A. When the compressor stops running for ten minutes or the coil temperature rises to 44.6°F (7°C), the unit restarts to function in the cooling or drying mode if the ambient temperature sensor detects the evaporator coil temperature is below 30.2°F (-1°C). 





Overload Protection
There is a 3-minute wait before the compressor restarts with a power outage in order to safeguard it.





Drainage





The self-evaporating system cools the condenser coils using the collected water for more effective operation. Except for drying operations and high humidity levels, there is no need to empty the drainage tank during cooling operations. At the condenser, the condensate water evaporates, then the exhaust hose will expel it out. Please attach the drain line to the unit in order to run the drying operation continuously or unattended. Gravity allows condensation water to flow naturally into a drain or bucket.





To avoid water spillage:
● Tilt the drain hose down toward the floor since the condensate drain pan has significant negative pressure. It is acceptable for the inclination to be greater than 20 degrees.
● To prevent an existing hose trap, straighten the hose.





CLEANING AND CARE





Cleaning The Air Filter
The filter becomes clogged with dust, which limits airflow. The reduced airflow decreases the system’s efficiency, and it may harm the unit if it becomes clogged. Every two weeks, the air filter has to be cleaned.





Cleaning Up Of Refrigerant

● Heavier than air gas or vapor. It can build up in small areas, especially below or at ground level.
● Identify and eliminate all potential ignition sources.
● Wear the necessary personal defense tools (PPE).
● Eliminate pointless personnel, seal off the space, and ventilate it.
● Avoid touching your skin, clothes, or eyes. Never inhale gas or vapor.
● Prevent access to public waterways and drains.
● If it’s safe to do so, stop the release’s source. Think about using a water spray to spread vapors.
● Until the gas has dissipated, isolate the area. Before entering, vent the area and gas-test it. After a spill, contact the authorities.





Troubleshooting





To prevent component damage and mold, the evaporator inside the machine needs to be dried off before you package the unit. To dry out the device, unplug it and leave it in a dry, open area for several days. Another technique to dry the unit is to switch on the appliance, set the ventilation to low-wind, and leave it there until the drainage pipe is completely dry. This will keep the interior of the body dry and avoid mildew.





The unit is not operating





Inspection
● Verify the integrity of the power connection.
● Look to see whether the water level indicator is on.
● Verify the temperature of the space.





Solution
● Securely tuck the power cord into the wall outlet.
● Remove the rubber stopper to empty the drain pan.
● The operational temperature range is 41°F-95°F (or 5°C-35°C).




The unit works with reduced capacity





Inspection
● Examine the air filter for debris.
● Check the clogged air duct.
● Make sure the window or door to the room is open.
● Verify that we choose correctly the required operating mode and that it set correctly the temperature.
● The exhaust hose has broken off.





Solution
● As needed, clean the air filter.
● To overcome the barrier.
● Close the windows and the door.
● Set the temperature and mode at the correct set-point as instructed in the instructions.
● Ensure that the exhaust hose is well fastened.





Water Leakage




Inspection
● While shifting the unit, overflow.
● Look to see whether the drain hose is twisted or kinked.





Solution
● Prior to transportation, empty the water tank.
● To prevent a trap from developing, straighten the hose.





Excessive Noise





Inspection
● Look for any loose or vibrating components.
● The noise resembles flowing water.





Solution
● Fix and tighten the components.
● We generated the sound of running refrigerant. That is typical.





Error Codes





Inspection 
● Faulty communication between the display PCB
● The main PCB failure of the ambient temperature sensor.
● Failure of the coil temperature sensor.
● Condensate water alarm for high levels.





Solution
● Examine the display of PCB’s wiring harness for damage.
● Examine the connection or change it. Whether to wash or exchange the temperature sensor.
● Examine the connection or change it.
● Cleaned or replaced the temperature sensor.
● Remove the rubber stopper to empty the drain pan.





Check Out This Product Online on Costway

8000 BTU 3-in-1 Portable Evaporative Portable Air Cooler Fan with Remote Control





On hot days, the portable air conditioner will be your best option. This portable air cooler has a stylish and small design that makes it simple to set up in any room of your home. Its excellent mobility allows you to move it to any room you choose, thanks to the moving casters. You may use a portable air conditioner’s convincing performance to collect moisture and discharge fresh air for a healthy and comfortable living environment, besides enjoying the high cooling efficiency of a portable air conditioner.





The comfort and ease of its clever digital control, which offers you convenient operation and high-level life, may also please you. You should bring this portable air conditioner home to check how it works as the ideal solution if you want to maintain your house tidy and cool.





To learn more about this product, please visit Costway!